Oil-and-gas-piston-pumps-with-ultra-high-pressure: pm80 - 533911 - Product detail
SAMOA Industrial
Ref.: 533911
PNEUMATIC PISTON GREASE PUMP, PUMPMASTER 80, PM80 - 200:1, 185 KG (400 LB) DRUMS, NPT
Ref.: 533911
PNEUMATIC PISTON GREASE PUMP, PUMPMASTER 80, PM80 - 200:1, 185 KG (400 LB) DRUMS, NPT
PM80 series air operated piston pumps. Ultra high pressure double acting pump. 200:1 pressure ratio pump designed for use in oil and gas wells in wireline and plug valve applications. In wireline applications, these pumps are used to seal against the well external pressure, preventing the tube from collapsing as the well is perforated. In plug valve applications, these pumps pump heavy grease into “christmas tree valves”, sealing any gas leak. Features: · 8” air motor effective diameter for maximum power. · Well proven, no stall and no ice forming air motor. · Reinforced construction, to stand up to 1.200 bar pressure. · Reliable fluid seals. · Divorced designed with steel covers to protect pump rod from tough environment Air consumption at 5 bar (70 psi) air pressure, NLGI-2 grease at 20 °C (68 °F) and 40 cpm. Noise level measured at 1 m (3.3’) from the pump, 6 bar (87 psi) air pressure and free delivery. WARNING: SAMOA 8” 200:1 pumps deliver pressures up to 1.200 bar (18,000 psi) which is in excess of the rated capacity of the accessories normally used with lubrication equipment. These 200:1 pumps can only be used in permanently installed systems where the pump is connected directly to the piping with a proper rating for the application. Instruction book: 853831.
About this product:
File 533911
SAMOA Equipment for Oil & Gas markets
Technical data
Documentation
More information
| Fluids | Grease |
| Fluids | Grease |
| Target product type | Oil and Gas Piston Pumps with Ultra High Pressure |
| Model | PM80 |
| Application | Automotive Repair & Maintenance, Industrial Processes, Industrial Lubrication, Extrusion |
| Pressure ratio | 200:1 |
| Delivery | 1,5 kg/min (3,3 lb/min) |
| Delivery per cycle | 1,7 kg (3,8 lb) |
| Cycles per minute (aprox.) | 40 cycles |
| Maximum free flow delivery | 1,7 kg/min (3,8 lb/min) |
| Air pressure operating range | 2-6 bar (29-87 psi) |
| Air consumption | 1300 NL/min (46 scfm) |
| Maximum outlet pressure | 1200 bar (17400 psi) |
| Air motor effective diameter | 200 mm (8 ") |
| Air motor stroke | 100 mm (4 ") |
| Air inlet | 3/4" NPT (F) |
| Fluid inlet type | Chop-check |
| Fluid outlet | Autoclave Engineers Medium Pressure Port for 9/16“ Tube, 13/16 - 16 Thread |
| Wetted materials | Carbon steel, Cast iron, Bronze, PEEK, PTFE |
| Pump tube material | Carbon steel |
| Pump Mounting | 185 kg (400 lb) drums |
| Tube height | 855 mm (33,7 ") |
| Total height | 1539 mm (60,6 ") |
| Sound level | 80 dB |
| Weight | 59 kg (130 lb) |
Ref.
Process
999999
Ref.
Lubrication
410002
Ref.
Lubrication
410001
Ref.
Lubrication
410000
Ref.
applied.key
391021
Ref.
applied.key
391020
Ref.
Process
391010
Ref.
applied.key
391006
Ref.
applied.key
391004
Ref.
Lubrication
391003
Ref.
Process
391001.270
Ref.
applied.key
391000
